ANTCLABS
Partagé en mode public -ANTCLABS BLTouch : Auto Bed Leveling Sensor for 3D Printers
Model : BLTouch-Classic
Model : BLTouch-Classic
1
1
Laisser un avis
Aide · Région
Créer un Hangout
Profile
ANTCLABS
Employeur actuel : ANTCLABS
Ancien établissement fréquenté : Dongguk University
Lieu de résidence : Seoul
127 abonnés|150 186 consultations
BioPostsCollectionsPhotosYouTube+1
Stream
ANTCLABS
Partagé en mode public -antclabs@gmail.com
BLTouchs will be shipped in : One business day
We are shipping perks everyday, except holidays of the post office.
Generally, we try to ship on the day if you order before the time below:
KST (Korea Standard Time) 15:00
GMT (Greenwich Mean Time) 06:00
PDT (Pacific Daylight Time) 23:00
BLTouchs will be shipped in : One business day
We are shipping perks everyday, except holidays of the post office.
Generally, we try to ship on the day if you order before the time below:
KST (Korea Standard Time) 15:00
GMT (Greenwich Mean Time) 06:00
PDT (Pacific Daylight Time) 23:00
1
1
ANTCLABS
Partagé en mode public -Thank you very much!!☆☆
We have reached our goal in 31 hours :)
Thank you for your enthusiastic support and welcome to be a BLTouch family!
We have reached our goal in 31 hours :)
Thank you for your enthusiastic support and welcome to be a BLTouch family!
NOW SHIPPING! Only for
15 days from April 24th, 2016. | Crowdfunding is a democratic way to support the fundraising needs of your community. Make a contribution today!
1
ANTCLABS
Partagé en mode public -ANTCLABS BLTouch : Auto Bed Leveling Sensor for 3D Printers
▣ Sanguinololu1.3a + BLTouch
1
ANTCLABS
Partagé en mode public -Wombot Modus- 3D printer !
I heard that many of our customers are using Wombot :)
http://www.aurarum.com.au/32-wombot-3d-printers
I heard that many of our customers are using Wombot :)
http://www.aurarum.com.au/32-wombot-3d-printers
1
Dans ses cercles
246 contacts
Dans les cercles de
127 contacts
ANTCLABS
Partagé en mode public -antclabs@gmail.com
BLTouchs will be shipped in : One business day
We are shipping perks everyday, except holidays of the post office.
Generally, we try to ship on the day if you order before the time below:
KST (Korea Standard Time) 15:00
GMT (Greenwich Mean Time) 06:00
PDT (Pacific Daylight Time) 23:00
BLTouchs will be shipped in : One business day
We are shipping perks everyday, except holidays of the post office.
Generally, we try to ship on the day if you order before the time below:
KST (Korea Standard Time) 15:00
GMT (Greenwich Mean Time) 06:00
PDT (Pacific Daylight Time) 23:00
antclabs@gmail.com
1
1
ANTCLABS
Partagé en mode public -☆★ BLTouch Set up manual V3 written by Anthony Quayle.
http://www.antclabs.com/pdf/AnthonyQuayle003.pdf
It can really help you !
http://www.antclabs.com/pdf/AnthonyQuayle003.pdf
It can really help you !
1
2 commentaires
+Ben C That menu item isn't in the official Marlin release. To add it you will need to write some code in Ultralcd.cpp to send the reset gcode.
· Traduire
ANTCLABS
Partagé en mode public -Hi everyone who are interested in BLTouch !
We launched BLTouch-C at Indiegogo for promotion !! :D
For Early Birds, 1pcs of BLTouch is just $24 USD!
This is only for 15days.
Always BIG thanks to you, BLTouch family ☆
We launched BLTouch-C at Indiegogo for promotion !! :D
For Early Birds, 1pcs of BLTouch is just $24 USD!
This is only for 15days.
Always BIG thanks to you, BLTouch family ☆
NOW SHIPPING!
With BLTouch, your 3D printer can be a masterpiece and have high precision. | Crowdfunding is a democratic way to support the fundraising needs of your community. Make a contribution today!
1
1
ANTCLABS
Partagé en mode public -ANTCLABS BLTouch : Auto Bed Leveling Sensor for 3D Printers
▣ SAV MKI + BLTouch
▣ SAV MKI + BLTouch
1
ANTCLABS
Partagé en mode public -ANTCLABS BLTouch : Auto Bed Leveling Sensor for 3D Printers
▣ Smoothieboard (Smoothieware) + BLTouch
※ Controlling BLTouch on Smoothieboard is little different with other boards.
Make sure you are using the latest version.
We tested Smoothieboard on the version edge-804489c, which is built on April 19th of 2016.
This may be unusable for former versions.
config.txt -> switch.servo.output_pin 1.23 #1.23 or 1.24 or 1.26
If you use 1.24 or 1.26 pin, it is recommended to connect 10K resistor between orange and brown.
We had a great time with Smoothieboard, such a gorgeous board.
▣ Smoothieboard (Smoothieware) + BLTouch
※ Controlling BLTouch on Smoothieboard is little different with other boards.
Make sure you are using the latest version.
We tested Smoothieboard on the version edge-804489c, which is built on April 19th of 2016.
This may be unusable for former versions.
config.txt -> switch.servo.output_pin 1.23 #1.23 or 1.24 or 1.26
If you use 1.24 or 1.26 pin, it is recommended to connect 10K resistor between orange and brown.
We had a great time with Smoothieboard, such a gorgeous board.
4
4
5 commentaires
thank you all for this
· Traduire
Contacts
Dans ses cercles
246 contacts
Dans les cercles de
127 contacts
Adresses
Domicile actuel
Seoul
Liens
YouTube
Parcours professionnel
Emplois
- ANTCLABSCEO, présent
Formation
- Dongguk UniversityBachelor of Science in Mechanical Engineering
Informations générales
Sexe
Femme
Autres noms
Paris Kyung-yeon Lee
Les +1 de ANTCLABS correspondent aux contenus que cet utilisateur aime, approuve ou souhaite recommander.
BLTouch Coming to Indiegogo Tomorrow – A Bed Leveling Sensor for 3D Prin... 3dprint.com Perhaps the greatest pet peeve I have when it comes to FDM/FFF based 3D printers are those machines which don't come with automatic bed leve |
BLTouch Auto Level Sensor Ships to Backers 3dprint.com If there's one thing that's a real pain when it comes to 3D printing it's bed leveling. Often users find it difficult to get their printer b |
