Art. EA-LCD-008

1.5 inch RGB OLED 128x128 px

Embedded Artists' 1.5 inch RGB OLED Module adds color graphics capabilities to your project.

The module used the UG-2828GDEDF11 OLED from Univision Technology with integrated controlled chip SSD1351 from Solomon Systech.

The display has an SPI or 8-bit parallel interface and is simple to control. The display module connects to Embedded Artists' standard 14-pos expansion connector, and then uses the SPI interface. Several of our products have the serial expansion connector on-board. More modules are found here.

A small graphical library for the display, with basic drawing operations, can be downloaded from our support page after purchase of the display.

Introduction and Demo

Specification

1.5 inch RGB OLED Module

Based on display UG-2828GDEDF11 from Univision Technology
Display technology: Passive Matrix OLED
Display colors: 262144 (18 bit resolution)
Diagonal size: 1.5 inch
No of pixels: 128x128
View area: 26.9 × 26.9 mm
Pixel size: 0.045 x 0.194 mm
Pixel pitch: 0.21 x 0.21 mm (RGB pixels)
SSD1351 driver from Solomon
3 or 4-wire SPI or 8-bit parallel (8080 or 6800) interface
Module supply voltage: 3.3V
Operating temperature: -30 to + 70 degrees Celsius
Two standard 14 pos serial expansion connector interfaces (2x7 shrouded pin header, 50/100 mil spacing)
20 pos connector for parallel interface (2x10 shrouded pin header, 100 mil spacing)
49 x 70 mm module size
3.2 mm mounting holes in 40 x 47 mm pattern

Supported Boards

The RGB OLED Module can be used directly with any of the following Embedded Artists boards:

OEM Base Board - included in the LPC1788 / LPC4088 / LPC3250 Developer's Kit.
AOA Application Kit

It is simple to interface the standard 14-pos serial expansion connector with any custom design.

Documentation and Resources

1.5 inch RGB OLED Module

Schematics and Measurements
RGB OLED Module - Rev A (updated 2012-08-22)

Datasheets
UG-2828GDEDF11 - 1.5 inch 128x128 pixel RGB OLED
UG-2828GDEDF11 EVK Users Manual - Application Note from Univision
SSD1351 - OLED Controller
FAN5331 - OLED Supply Driver

14 pos Serial Expansion Connector
Specification

Declaration of Conformity
CE Declaration of Conformity (soon available)
Embedded Artists' general RoHS 2 declaration

Software

Sample Software Disclaimer

Demo: Shows how to initialize the display and how to use the graphical library.
Project Files: The sample applications contain project files for the free LPCXpresso IDE/Debugger.
BSP: Board Support Package exists for the LPC1788 Developer's Kit, the LPC4357 Developer's Kit and the AOAA Kit.

Included in kit

One 1.5 inch RGB OLED Modules with display UG-2828GDEDF11 from Univision Technology
One 80mm 14 pos 100 mil pitch flat cable (serial expansion cable)
Serial number that gives you access to the support site for this product