The GPS Receiver Board has many advanced features and a packed specification list:
-
Based on PA6H module that includes the MTK3339 chipset
-
Built-in ceramic patch antenna (15 x 15 x 4 mm)
-
-165 dBm sensitivity, up to 10 Hz update rate
-
Track up to 22 satellites on 66 channels
-
Only 20mA current draw during navigation
-
RTC battery-compatible (CR1220 battery connector, note: battery not included)
-
PPS output on fix
-
Fix status LED (0.5Hz blink=no fix, 2Hz blink=fixed position)
-
3.3V interface via 14-pos (50 mil pitch) 14-pos expansion connector (note: 50-mil pitch cable not included, see Related Products below) or
-
interface module via XBee compatible edge pin lists (note: pin lists included but requires soldering)
-
Auto switchover to external antenna (note that UF.L. antenna connector not included)
Technical details about the PA6H module:
-
Satellites: 22 tracking, 66 searching
-
Update rate: 1 to 10 Hz, 1 Hz default
-
Position Accuracy: 1.8 meters
-
Velocity Accuracy: 0.1 meters/s
-
Warm/cold start: 34 seconds
-
Acquisition sensitivity: -145 dBm
-
Tracking sensitivity: -165 dBm
-
MTK3339 Operating current: 25mA tracking, 20 mA current draw during navigation
-
Output: NMEA 0183, 9600 baud (8N1) default
-
Jammer detection and reduction
-
Multi-path detection and compensation
