Cartesian coordinate robot

From Wikipedia, the free encyclopedia
Jump to: navigation, search
Kinematic diagram of cartesian coordinate robot
a plotter is an implemention of the cartesian coordinate robot

A cartesian coordinate robot (also called linear robot) is an industrial robot whose three principal axis of control are linear (i.e. they move in a straight line rather than rotate) and are at right angles to each other.The three sliding joints correspond to moving the wrist up-down,in-out,back-forth. Among other advantages, this mechanical arrangement simplifies the Robot control arm solution. Cartesian coordinate robots with the horizontal member supported at both ends are sometimes called Gantry robots. They are often quite large.

A popular application for this type of robot is a computer numerical control machine (CNC machine) and 3D printing. The simplest application is used in milling and drawing machines where a pen or router translates across an x-y plane while a tool is raised and lowered onto a surface to create a precise design. Pick and place machines and plotters are also based on the principal of the cartesian coordinate robot.

See also[edit]

References[edit]