with antennas

Art. EAA00202
without antennas

Art. EAA00248

Cellular and Positioning Shield 2.5G/GSM

Embedded Artists' Cellular and Positioning Shield lets you get up-and-running quickly with IoT applications and general M2M applications. The shield is built around u-blox excellent, high-quality modules;

Cellular module to allow remote communication over the cellular network.
Positioning module to allow exact positioning via GPS/GNSS.

There are two versions of the shield. This product page describes the 2.5G (GSM/GPRS) version.

The board has been developed in cooperation with u-blox.

Example Code

The u-box modules are very easy to communicate with, see their respective user's manuals for details. Example code is listed below (but is in general very easy to port to other platforms):

LPC4088 Experiment Base Board (together with LPC4088 QuickStart Board)
mbed component

Introduction Video

Specification

Shield features

2.5G (GSM/GPRS) version

SARA-G350-0xS GSM/GPRS (2.5G) module
- Quad-band version for global connectivity
- UART and POWER_ON GPIO interface
MAX-7Q-0 GPS/GNSS module
- I2C and GPS_EXTINT GPIO interface

SMA connectors for both modules (R/A female)
SIM connector
Arduino shield pinning
Raspberry Pi (RPi) 26-pos expansion connector compatible pads (note: pin header/connector not soldered)
The on-board power supply needs external powering (5-12V DC / 1 Amp). Can be supplied via micro-B USB connector, Arduino connectors or RPi connector.

The on-board connectors (Arduino shield pinning and Raspberry Pi expansion connector) are very easy to use also for custom boards.

The shield can easily connect to LPCXpresso V2 boards - check example code availability before selecting LPCXpresso board to work with.