Price

35€

Art. EA-XPR-012
Out-of-stock

Price

49€

with LPC1115

Art. EA-XPR-015

In Stock: 8 weeks

LPCXpresso Experiment Kit

The LPCXpresso Experiment Kit has been created as a guided tour to learn embedded programming with NXP’s LPC1000 microcontroller family with Cortex-M0/M3 cores from ARM. The experiments can be performed on a breadboard for maximum flexibility and ease of use. It is also possible to solder the components to a printed circuit board (pcb) and learn soldering at the same time.


Working with breadboard experiments	or	Soldering all componnets to pcb

The kit requires an LPCXpresso LPC1000 board. This must be bought separately. There is a kit bundle available at reduced price (with the LPCXpresso LPC1115 board).

All experiments are based around the LPCXpresso LPC1115 board (LPC1114 board is also ok to use). Some more advanced experiments with Ethernet and USB requires the LPCXpresso LPC1769 board.

The kit is perfect for:

professionals that want to learn the LPCXpresso evaluation boards and the LPCXpresso IDE.
students and hobbyists that want to learn more about embedded program development and programming microcontrollers.
University professors that want to have an education platform. The extensive experiment manual can be used as-is or as a base for developing lecture-tailored experiment.

Kit Presentation

Specification

LPCXpresso Experiment Kit

Components included in the kit are:

8x red LEDs
2x Trimming potentiometers
7x push-buttons
RGB-LED
Light sensor (analog)
Temperature sensor (analog)
7-segment LED, dual digit
E2PROM with SPI interface
Temperature sensor with I2C interface (only for pcb mounting)
Piezo buzzer
Rotary quadrature encoder (only for pcb mounting)
Shift register
I2C ports expander (PCA9532, only for pcb mounting)
USB Host connector (only for pcb mounting)
USB Device connector (only for pcb mounting)
RJ45 connector for Ethernet (only for pcb mounting)
14-pos serial expansion connector, for interface to for example graphical displays
3x servo connectors. Note that servos are not included.
XBee™ compatible socket (for ZigBee and WiFi modules). Note that RF module is not included.
LPC1114 in DIL28 package, with 12MHz crystal and SWD connector (only for pcb mounting)
Local +3.3V voltage regulator
Miscellaneous resistors, capacitors, transistors and connectors
Breadboard with cables
Naked PCB

Documentation and Resources

Support Site

The following resources are available for download.

Documents

LPCXpresso Experiment Kit User's Guide (in pdf) - updated 2013-06-13
LPCXpresso Experiment Kit Schematics (in pdf)
LPCXpresso Experiment Kit PCB component placement (in pdf)
LPCXpresso Experiment Kit PCB measurements (in pdf)
LPCXpresso Getting Started Manual (pdf from NXP)
Embedded Artists' general RoHS 2 declaration

Software

Sample Software Disclaimer

Project files exist for NXP's LPCXpresso.

LPCXpresso Experiment Kit Software Framework (2013-06-13) Skeleton to get started with first experiments
LPCXpresso Experiment Kit Software Solutions (available from the support site after having registered Product Serial Number)
LPCXpresso Experiment Kit Additional Files (available from the support site after having registered Product Serial Number)

Forum and Support