This is a file from the Wikimedia Commons

File:Pick and place internals of surface mount machine.JPG

From Wikipedia, the free encyclopedia
Jump to: navigation, search
Original file ‎(1,322 × 1,138 pixels, file size: 302 KB, MIME type: image/jpeg)

Summary[edit]

Description
English: Internals of a Juki KE2010L 4-head pick and place surface mount machine. The machine is used to place electronic components that are soldered to the face of a printed circuit board rather than having leads that go through holes in the board. The machine is loaded with standard 8" reels on mechanical feeders (front right) and a tray of QFP microprocessors (rear centre).
Date
Source Own work
Author Peripitus

Licensing[edit]

I, the copyright holder of this work, hereby publish it under the following licenses:
GNU head Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License.
w:en:Creative Commons
attribution share alike		 This file is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported, 2.5 Generic, 2.0 Generic and 1.0 Generic license.
You are free:
  • to share – to copy, distribute and transmit the work
  • to remix – to adapt the work
Under the following conditions:
  • attribution – You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work).
  • share alike – If you alter, transform, or build upon this work, you may distribute the resulting work only under the same or similar license to this one.
You may select the license of your choice.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:30, 3 October 2007Thumbnail for version as of 12:30, 3 October 20071,322 × 1,138 (302 KB)Peripitus{{Information |Description= Internals of a Juki 850 4-head pick and place surface mount machine. The machine is used to place electronic components that are soldered to the face of a printed circuit board rather than having leads that go through holes in
The following pages on the English Wikipedia link to this file (pages on other projects are not listed):

Global file usage

The following other wikis use this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturer FUJIFILM
Camera model FinePix S5700 S700
Exposure time 1/45 sec (0.022222222222222)
F-number f/3.5
ISO speed rating 400
Date and time of data generation 14:38, 4 October 2007
Lens focal length 6.3 mm
Horizontal resolution 72 dpi
Vertical resolution 72 dpi
Software used Digital Camera FinePix S5700 S700 Ver1.01
File change date and time 14:38, 4 October 2007
Y and C positioning Co-sited
Custom image processing Normal process
Exposure mode Auto exposure
White balance Auto white balance
Scene capture type Standard
Sharpness 3
Subject distance range Unknown
Exposure Program Normal program
Exif version 2.2
Date and time of digitizing 14:38, 4 October 2007
Image compression mode 4
Shutter speed 5.5
APEX aperture 3.6
APEX brightness 2.1
Exposure bias 0
Maximum land aperture 3.6 APEX (f/3.48)
Metering mode Pattern
Light source Unknown
Flash Flash fired, auto mode
Color space sRGB
Focal plane X resolution 5,376
Focal plane Y resolution 5,376
Focal plane resolution unit 3
Sensing method One-chip color area sensor
Retrieved from "https://en.wikipedia.org/wiki/File:Pick_and_place_internals_of_surface_mount_machine.JPG"