| Processor |
NXP ARM Cortex-A9/Cortex-M4 i.MX 6SoloX 1 GHz (227 MHz for Cortex-M4 core) |
| Memory |
1 GByte DDR3L 800 MT/s, 32-bit databus
4 GByte eMMC NAND Flash for OS and bootloader
64 MByte QSPI NOR Flash (2x32 MByte) for Cortex-M4 code |
| Graphics output |
LVDS: 18/24 bit, up to 85 Mpixels/sec, for example WXGA (1366 x 768 px) at 60 Hz
Parallel RGB: 24-bit up to WXGA (1366 x 768 px) at 60 Hz
Graphics Engine: GPU (GC400T) supporting OpenGL ES 1.1/2.0, OpenVG 1.1 APIs |
| Graphics input |
CMOS sensor interface (camera), parallel interface
NTSC/PAL analog video input interface (4 ch) |
| Ethernet |
Dual 10/100/1000 Mbps Gigabit Ethernet interfaces based on Atheros AR8031 Ethernet PHY |
| I/O |
i.MX6SoloX peripherals (see i.MX 6SoloX datasheet for details about peripherals):
• PCIe; 1x lane, v2.0
• USB; 1x USB 2.0, 1x USB 2.0 OTG
• Audio; up to 4 I2S/AC97 ports
• SPDIF; 1 channel
• SDIO; 3x MMC/SD/SDIO
• Serial Port; 6x UART
• SPI; 5x eCSPI
• CAN; 2x CAN bus 2.0B
• I2C; 4x channels
• ADC; 8 12-bit inputs
• PWM; 8x channels
See iMX6 SoloX COM Board Datasheet for details about available pins/peripherals. |
| Mechanical |
82 x 50 mm (W x D), SMARC form factor but different pinning for better carrier board routing |
| Power |
+3.3V power supply voltage
Power consumption: TBD |
| Connectors |
314 pos MXM3 edge connector, 0.5mm pitch
10 pos, 0.5mm pitch FPC for JTAG |
| Environment |
Operating Temperature: 0 - 60 degrees Celsius (standard) or -40 to +85 degrees Celsius (on request)
Operating Humidity: 5 - 90% relative humidity, non-condensing |
| Other |
• i.MX 6SoloX on-chip RTC
• On-board watchdog functionality
• Integrated power managment with PMIC (PF0200) supporting DVFS techniques for low power modes |
Product Classification
and Status |
Integration board; In Development/Sampling |
