Price

45€

Art. EA-QSB-013

LPC12D27 QuickStart Board

Embedded Artists' LPC12D27 QuickStart Board lets you get up-and-running quickly with NXP's Cortex-M0 LPC12D27 microcontroller. This evaluation board offers many features that ease your learning curve and speed up your program development.

Specification

LPC12D27 QuickStart Board

Processor	NXP's Cortex-M0 LPC12D27 microcontroller in 100-pin LQFP package.
Program Flash	128 KB
Data Memory	8 KB
Clock Crystals	• 12.000 MHz external crystal. The LPC12D27 runs at frequencies up to 45 MHz. • 32.768 kHz rtc crystal.
Interfaces / Connectors	• All LPC12D27 pins are available on expansion connectors around the processor (100 mil/2.54 mm pitch dual rows). • UART-to-USB bridge interface for LPC12D27 UART, with mini-B USB connector and proper ESD protection.
Dimensions	110 x 100 mm (W x H)
Power	Flexible powering, with on-board 800mA 3.3V voltage regulator. Can be powered from USB connector, JTAG connector (if supported by JTAG device) or an external +5V supply.
Connectors	• All LPC12D27 pins are available on connectors. • mini-B USB connector. • SWD/JTAG connector (50 mil/1.27 mm pitch, standard SWD/JTAG connector). Pad for older, larger 20pos 100 mil pitch JTAG connector also exists, but connector not soldered.
Other	• LCD with 8 14-segment characters. • 32 Kbit I2C E2PROM. • LM75 I2C temperature sensor. • Trimming potentiometer on analog input. • 4 capacitive sensors. • Support for '555' hardware timer functionality of the LPC12D27. • Onboard reset generation and reset push-button. • Push-button for enabling Bootloader mode of the LPC12D27. • Push-button for enabling start logic of the LPC12D27. • Push-button for wakeup logic of the LPC12D27. • Possibility to measure current consumption for LPC12D27 core, I/O and LCD controller parts individually. • 3 LED on pin PIO0_12, PIO0_27 and PIO0_28.