Art. EA-QSB-012

LPC1343 QuickStart Board

Note: This product is non-stock. Please have a look at the LPC11U35 QuickStart Board as a suitable replacement.

Embedded Artists' LPC1343 QuickStart Board lets you get up-and-running quickly with NXP's Cortex-M3 LPC1343 microcontroller. The small sized board offers many features that ease your learning curve and speed up your program development.

Easy usage

Download code to the board by using:

The USB-ISP mode where the board will enumerate as a USB Mass storage device on a Windows PC. Just copy the compiled binary file to the storage device.
Use the free LPCXpresso IDE/Debugger together with, for example, an LPC-Link, a 10-pos IDC Ribbon cable and connect to the SWD interface (10-pin JTAG connector) on the board, see figure below. This allows you to both download and debug code on the board.
Use a debugger and JTAG adapter of your choice which supports the Cortex-M3 ARM core and more specifically the NXP LPC1343 microcontroller. You might need an adapter such as the 10-pin to 20-pin JTAG Adapter Kit between your JTAG solution and the target board.

LPC1343 QuickStart and LPC-Link

Specification

LPC1343 QuickStart Board

Processor	NXP's Cortex-M3 LPC1343 microcontroller in 33-pin HVQFN package.
Program Flash	32 KB
Data Memory	8 KB
Clock Crystals	12.000 MHz crystal for maximum execution speed and standard serial bit rates, including USB requirements. The LPC1343 runs at frequencies up to 72 MHz.
Interfaces / Connectors	• All LPC1343 I/O pins are available on edge expansion connectors, in DIL-30 structure suitable for bread board prototyping (dual 15 pos, 100 mil/2.54 mm pitch rows, 700 mil/17.78 mm apart). • On-board USB Device interface, with mini-B USB connector and proper ESD protection.
Dimensions	21 x 40 mm
Power	Flexible powering, with on-board 150mA 3.3V voltage regulator (can be powered from USB connector or an external +5V supply).
Connectors	• All LPC1343 I/O pins are available on connectors. • mini-B USB connector. • SWD/JTAG connector (0 mil/1.27 mm pitch, standard SWD/JTAG connector).
Other	• 32 Kbit I2C E2PROM for storing non-volatile parameters. • Onboard reset generation and reset push-button. • Push-button for enabling Bootloader mode of the LPC1343. • LED on pin PIO0_7. • 2 pcs 1x15 pinlists included, but not soldered.