LPC4357 OEM Board
  • Price
    99€
    Buy Now
    Art. EA-OEM-011
    85 €25-99
    76 €100-249
    Contact Us250+
[High Resolution Photos]
LPC4357 OEM Board

Embedded Artists' LPC4357 OEM Board is equipped with NXP's dual-core Cortex-M4/M0 based LPC4357 microcontroller suitable for applications that requires advanced communication and high quality graphic displays.

The board can be used in OEM applications, as well as for education purposes, experiment, and prototype projects. Use the LPC4357 Developer's Kit to get up-and-running quickly with the board.

Specification

LPC4357 OEM Board

Processor NXP's Dual core Cortex-M4/M0 LPC4357 microcontroller in BGA package, executing at up to 204MHz
Program Flash 1 MB internal FLASH + 128 MB external NAND FLASH
SPIFI Memory 16 Mbit QSPI flash
Data Memory 136 KB internal SRAM + 32 MB external SDRAM (with 32-bit data bus) + 16 KB internal E2PROM
Ethernet 100/10M Ethernet interface based on SMSC LAN8720 Ethernet PHY
Clock Crystals • 12.000 MHz crystal for CPU
• 32.768 kHz crystal for RTC
Dimensions 68 x 50 mm
Power +3.3V powering
Connectors

• 200 pos expansion connector (as defined in SODIMM standard), 0.6mm pitch
• 20 pos trace connector, 50 mil pitch
• Dual 20 pos I2S and SGPIO expansion connectors, 50 mil pitch
Other • uSD memory card interface connector
• 1 Kbit I2C E2PROM with EUI-48™ number (for Ethernet MAC address)
• Buffered 32-bit databus
Product Classification
and Status		 Integration board; Volume

 

Documentation and Resources

The following resources are available for download either directly below or from our support site after registration of the LPC4357 OEM Board.

Documents

Product Change Note (PCN)

Software

Sample Software Disclaimer

  • Port of LPCOpen v2.12 for LPCXpresso IDE and Keil uVision.
  • Alternative project files exist for Keil's MDK-ARM (Keil uVision), as listed below:
  • Display - An example of using the 3.2", 4.3" and 7" displays including touch support
  • Memreg - Illustrating how to turn on/off memory mapped LEDs on the OEM Base Board
  • Audio (I2S) - This example is using the UDA1380 audio code and I2S to play an audio file.
  • FatFs - An example using the FatFs module to access the micro SD memory card on the back of the OEM Board.
  • Speaker - WAV - This project illustrates the use of the speaker mounted on the OEM Base Board. The DAC output on the LPC4357 is used.
  • USB Host - Illustrates the use of  nxpUSBlib to detect a USB memory stick.
  • Demo Application - The demo application that is (typically) pre-loaded on the board

 

External Resources

Related Products