ANTCLABS BLTouch : Auto Bed Leveling Sensor for 3D Printers
▣ Smoothieboard (Smoothieware) + BLTouch

※ Controlling BLTouch on Smoothieboard is little different with other boards.
Make sure you are using the latest version.
We tested Smoothieboard on the version edge-804489c, which is built on April 19th of 2016.
This may be unusable for former versions.

config.txt -> switch.servo.output_pin    1.23    #1.23 or 1.24 or 1.26

If you use 1.24 or 1.26 pin, it is recommended to connect 10K resistor between orange and brown.

We had a great time with Smoothieboard, such a gorgeous board.