Welcome to the LaserWeb Wiki

LaserWeb GUI is a fully functional Laser Cutter controller. This project was started by Peter van der Walt, and with help of 10+ contributors and over 50 beta testers, is rapidly becoming a feature rich, mature software interface for Laser Cutters/Engravers that run on Windows/Linux/Mac/Raspberry Pi/Vagrant platforms.

It is a condition of use that the customer/user accepts complete responsibility for each and every aspect of safety associated with the use of the LaseWeb laser controller software.

Disclaimer

By using this software, the user accepts complete responsibility for each and every aspect of safety associated with the use of the Laser machine, Laser system and LaserWeb Software. You agree that:

You will not hold the author or contributors of LaserWeb liable for any damage to equipment or persons from the use of LaserWeb.
You know the potential hazards in using high power lasers and high voltages.
You will wear professional laser-eye-protection when using a laser controlled by LaserWeb.
You will use the LaserWeb software in a legal and safe manner.
You relieve the author and contributors from any liability arising from the use or distribution of the LaserWeb software.
You are entirely operating at your own risk. Lasers can be lethally dangerous.

*Please note that this Wiki is currently under construction. Content will be added almost daily. If you have any suggestions of things to add to the Wiki, especially the F.A.Q. page, please email me at anthonybolgar@live.com.*