Issuing an M24 causes the file selected with the M23 command to be printed. If the print was previously paused with M25, printing is resumed from that point. To restart a file from the beginning, use M23 to reset it, then M24.
When this command is used to resume a print that was paused, Smoothieware runs macro file resume.g prior to resuming the print.
[!NOTE] Print: Refers to running a job on any Smoothie attached device such as 3D printer, Laser engraver/cutter, CNC router etc.
The command is used as such:
M24
Which means: Print the file that was previously selected by the M23 command.
| Parameter | Usage | Example |
|---|---|---|
The M24 command requires no parameters. |
If your SD card’s contents were:
And you previously executed M23 myGcode.gco, then issuing the command:
M24
Will result in the gcode commands in the file myGcode.gco being executed.
The M24 command requires no special configuration settings.
These resources are used as references: